Kerio Tech KERIO WINROUTE FIREWALL 6 User Manual Page 91

  • Download
  • Add to my manuals
  • Print
  • Page
    / 368
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 90
7.4 Basic Traffic Rule Types
91
Destination
The Internet interfaces group. With this group, the rule is usable for any type of Internet
connection (see chapter 6) and it is not necessary to modify it even it Internet connection
is changed.
Service
This entry can be used to define global limitations for Internet access. If particular ser-
vices are defined for IP translations, only these services will be used for the IP translations
and other Internet services will not be available from the local network.
Action
To validate a rule one of the following three actions must be defined: Permit, Drop, Deny.
Translation
In the Source NAT section select the Default settings option (the primary IP address of
the interface via which packets go out from the WinRoute host will be used for NAT). This
also guarantees versatility of this rule IP address translation will always be working
correctly, regardless the Internet connection type and the particular link type via which
the packet will be sent to the Internet.
Warning
The No translation option should be set in the Destination address translation section,
otherwise the rule might not function. Combining source and destination IP address
translation is relevant under special conditions only .
Placing the rule
The rule for destination address translation must be preceded by all rules which deny
access to the Internet from the local network.
Note: Such a rule allows access to the Internet from any host in the local network, not from
the firewall itself (i.e. from the WinRoute host)!
Traffic between the firewall and the Internet must be enabled by a special rule. Since WinRoute
host can access the Internet directly, it is not necessary to use NAT.
Figure 7.22 Rule for traffic between the firewall and hosts in the Internet
Port mapping
Port mapping allows services hosted on the local network (typically in private networks) to
become available over the Internet. The locally hosted server would behave as if it existed
directly on the Internet (public address of the WinRoute host).
Since 6.4.0, WinRoute allows to access mapped services also from the local network. This
avoids problems with different DNS records for the Internet and the local network.
Traffic rule for port mapping can be defined as follows:
Page view 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 367 368

Comments to this Manuals

No comments